![background image](http://html.mh-extra.com/html/xerox/workcentre/workcentre_user-manual_884159560.webp)
ID Card Copy
WorkCentre
®
XXXX
560
User Guide
Use the Original Type options to enhance the quality of your output based on the type of original
images and how they were produced. For example, if you use a text setting for the original type your
device will produce output with sharper edges than if you selected a photo setting - this will make
text documents easier to read, but will reduce the quality of photo images where there are lightness
and darkness gradations not found in text.
1. Lift up the document feeder. Place the ID Card face down onto the document glass and register
it to the arrow at the top left rear corner. Close the document feeder.
2. Press
the
Clear All
button on the control panel to cancel any previous programming selections.
3. Press
the
Services Home
button.
4. Select
the
ID Card Copy
button on the touch screen.
5. Select
the
Image Quality Side 1
tab.
6. Select the Original Type option required.
•
Photo and Text
produces high quality pictures but slightly reduces the sharpness of text
and line art. This setting is recommended for originals containing high quality photographs
or line art and text.
•
Text
produces sharper edges and is recommended for text and line art.
•
Photo
gives the best quality for photos but reduced quality text and line art. It is the best
option for originals containing photos or continuous tones without any text or line art.
•
Newspaper / Magazine
is used if your original is from a magazine or newspaper that
contains photographs or text.
7. Enter the number of prints required using the numeric keypad on the control panel.
8. Press
Start
to scan the ID Card.
9. Turn over the ID Card on the document glass when scanning has completed.
10. Select any options required.
11. Press
Start
to scan the ID Card.
12. Remove the ID Card from the document glass when scanning has completed.
13. Press the
Job Status
button on the device control panel to view the job list and check the status
of the job.
More Information
Lightening or Darkening Copies of ID Cards
Setting the Background Suppression for ID Card Copying
Using a User ID to Log In at the Device
Lightening or Darkening Copies of ID Cards
ID Card Copy enables you to scan each side of an ID card onto one side of a single sheet of paper.
The ID card is placed on the document glass and the first side is scanned. When prompted, the card
is turned over and the other side is scanned. You can also set different image quality settings for
side 1 and side 2.
If Authentication or Accounting has been enabled on your device you may have to enter login
details to access the ID Card Copy features.
Summary of Contents for WorkCentre
