manualshive.com logo in svg

Xerox WorkCentre, User Manual

Share
Download
Xerox WorkCentre User Manual Download Page 533

E-Mail

WorkCentre

®

 XXXX

User Guide

533

16. Select 

Auto Suppression

 from the 

Background Suppression menu

 to automatically suppress 

unwanted background.

•

If required, select 

Off

 to turn the Background Suppression feature off. The Off option is 

particularly useful when the Darken adjustment does not produce a satisfactory output 
from light originals, the original has a gray or colored border, such as a certificate, or you 
want to bring out fine detail that was lost due to a dark edge when using bound originals.

17. Select the 

OK

 button.

18. Press the 

Start

 button on the control panel to scan the original.

19.  Remove the original from the document feeder or document glass when scanning has 

completed. The job enters the job list ready for processing.

20. Press the 

Job Status

 button on the device control panel to view the job list and check the status 

of the job. 

More Information

Choosing an Image Enhancement Option for E-mails
Setting the E-mail Contrast
Using a User ID to Log In at the Device
Lightening or Darkening E-mails
Using Internet Services to find System Administrator Contact Details

System Administrator Guide 

www.xerox.com/support

.

Setting the E-mail Contrast

Use the E-mail feature to scan images and send them to a recipient as an attachment to an e-mail.

Note: 

This option must be made available by your System Administrator.

If Authentication or Accounting has been enabled on your device you may have to enter login 
details to access the E-mail features.

Use the Contrast option to control the image density on the output and compensate for an original 
that has too much or too little contrast on the image.

1.  Load your documents face up in the document feeder input tray. Adjust the guide to just touch 

the documents.

Or

Lift up the document feeder. Place the document face down onto the document glass and 
register it to the arrow at the top left corner. Close the document feeder.

2. Press 

the 

Clear All

 button on the control panel to cancel any previous programming selections.

3. Press 

the 

Services Home

 button.

4. Select 

the 

E-mail

 button on the touch screen.

5.  If required, select the 

E-mail

 tab. This is usually the active tab when the E-mail service opens.

6. Select 

the 

New Recipient...

 button.

7.  Use the touch screen keyboard to enter the e-mail address of the recipient.

•

The number of alphanumeric characters that can be entered depends on the size of the 
characters chosen. Once the end of the entry box has been reached no more characters 
can be added.

•

To delete a character use the backspace 

X

 button.

•

Use the special characters button to access special characters such as $ and %.

Summary of Contents for WorkCentre

















































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands