![background image](http://html.mh-extra.com/html/xerox/workcentre/workcentre_user-manual_884159110.webp)
Copy
WorkCentre
®
XXXX
110
User Guide
Adding Covers to Copies
When you press the Start button to make a copy, the device scans your originals and temporarily
stores the images. It then prints the images based on the selections made.
If Authentication or Accounting has been enabled on your device you may have to enter login
details to access the Copy features.
Use the Covers option to add blank or printed pages to the front, back or front and back of your set.
This option is also used to add a cover to a booklet. The covers can be a different media to the rest
of your job.
1. Load your documents face up in the document feeder input tray. Adjust the guide to just touch
the documents.
Or
Lift up the document feeder. Place the document face down onto the document glass and
register it to the arrow at the top left corner. Close the document feeder.
2. Press
the
Clear All
button on the control panel to cancel any previous programming selections.
3. Press
the
Services Home
button.
4. Select
the
Copy
button on the touch screen.
5. If required, select the
Copy
tab. This is usually the active tab when the Copy service opens.
Note:
This feature is not available until a specific paper tray has been selected. It is not
available if the paper Auto Select option is active.
6. Set the Paper Supply required for the main body of the job.
7. Load the media to be used for the covers into another paper tray, ensuring that it is in the same
size and orientation as the paper you are using for the main body of your job.
8. If required, update the Paper Settings screen and select the
Confirm
button to approve your
selections.
9. Select
the
Output Format
tab.
10. Select the
Special Pages
button.
11. Select the
Covers...
button.
12. Select the Covers Option required. Covers can be blank or contain images.
•
Off
cancels any programming you have entered.
•
Front & Back Same
adds a blank or printed cover to the front and back of the document.
The printing and paper supply options are identical for both covers.
•
Front & Back Different
adds a blank or printed cover to the front and back of the
document. The printing and paper supply options can be programmed individually for
each cover.
•
Front Only
adds a blank or printed cover to the front of the document.
•
Back Only
adds a blank or printed cover to the back of the document.
13. Select the Printing Option required for the covers.
•
Blank Cover
provides a blank sheet as the cover.
•
Print on Side 1
prints an image on side 1 of the cover.
•
Print on Side 2
prints an image on side 2 of the cover. Select
Rotate Side 2
to rotate the
image on the second side.
•
Print on Both Sides
prints an image on both sides of the cover. Select
Rotate Side 2
to
rotate the image on the second side.
Summary of Contents for WorkCentre
