![background image](http://html.mh-extra.com/html/xerox/workcentre/workcentre_user-manual_884159173.webp)
Fax
WorkCentre
®
XXXX
User Guide
173
11. Remove the original from the document feeder or document glass when scanning has
completed.
12. Press the
Job Status
button on the device control panel to view the job list and check the status
of the job.
More Information
Building a Server Fax Job with Multiple Page or Segment Settings
Using a User ID to Log In at the Device
Explaining the Fax Options
Using Internet Services to find System Administrator Contact Details
System Administrator Guide
www.xerox.com/support
.
Setting the Original Type for Faxes (Server Fax)
Server Fax scans your documents and sends them to any type of fax machine that is connected to
a telephone network. Your images are sent from your device to a third party fax server, which relays
them over the telephone network to the fax number of your choice.
Note:
This option must be made available by your System Administrator.
If Authentication or Accounting has been enabled on your device you may have to enter login
details to access the Server Fax features.
Use the Original Type options to define the type of original being scanned. Making the correct
selection enhances the quality of your output image.
1. Load your documents face up in the document feeder input tray. Adjust the guide to just touch
the documents.
Or
Lift up the document feeder. Place the document face down onto the document glass and
register it to the arrow at the top left corner. Close the document feeder.
2. Press
the
Clear All
button on the control panel to cancel any previous programming selections.
3. Press
the
Services Home
button.
4. Select
the
Server Fax
button.
5. If required, select the
Server Fax
tab. This is usually the active tab when the Server Fax service
opens.
6. Select
the
Enter Fax Number entry box
and use the numeric keypad, or the touch screen
keypad to enter the recipient’s fax number.
7. Select
the
Add
button.
•
If you want to send the document to more than one recipient enter the additional details,
one recipient at a time, and select the
Add
button again until all the recipients have been
added.
8. Select
the
Close
button to save the information you entered.
9. Select the Original Type option required.
•
Photo and Text
produces high quality pictures but slightly reduces the sharpness of text
and line art. This setting is recommended for originals containing high quality photographs
or line art and text.
•
Photo
gives the best quality for photos but reduced quality text and line art. It is the best
option for originals containing photos or continuous tones without any text or line art.
•
Text
produces sharper edges and is recommended for text and line art.
Summary of Contents for WorkCentre
