![background image](http://html.mh-extra.com/html/xerox/workcentre/workcentre_user-manual_884159601.webp)
Internet Services
WorkCentre
®
XXXX
User Guide
601
Use the Hole Punch option if you want the device to punch holes in each page after it is printed.
Each sheet will be punched individually so there is no limit to the number of pages you can have in
a set. Hole punching can only be selected for A4 LEF (8.5 x 11" LEF) and A3 (11 x 17”) paper.
Note:
SEF is Short Edge Feed (where the short edge of the paper is the leading edge when the paper
is fed into the device). LEF is Long Edge Feed (where the paper is oriented so that the long edge is
fed into the device first).
1. At your computer, open your web browser.
2. In the URL field, use your keyboard to enter http:// followed by the IP Address of the device. For
example: If the IP Address is 192.168.100.100, enter http://192.168.100.100.
Note:
To find out the IP Address of your device, print a configuration report or ask your System
Administrator.
3. Press
the
Enter
button on your keyboard to load the page.
4. Click
the
tab.
5. Click
the
Browse...
button and navigate to your print-ready file.
6. Select the file you want to print. Either double-click the file to select it, or click on the file once
and then click the
Open
button. The file name and path will be shown in the File Name box.
7. Select the Hole Punch option required. The options vary depending on the type of finisher
attached to your device.
•
Auto
uses the settings programmed in the print-ready file.
•
No Punch
switches off hole punching.
•
Punch On
switches on hole punching.
8. Click
the
Submit Job
button.
9. Collect your job from the device.
10. Press the
Job Status
button on the device control panel to view the job list and check the status
of the job.
11. Print jobs are usually shown in the Active Jobs list, however if your System Administrator has
enabled the Hold All Jobs feature, your job will be listed in either the Held Print Jobs or the
Unidentified Print Jobs list. To release a held job select the job in the required list and then
select the
Release
button.
12. If your job remains held in the Active Jobs list, the device needs you to supply additional
resources, such as paper or staples before it can complete the job. To find out what resources
are needed, select the job and then select the
Details
button. Once the resources are available
the job will print.
More Information
Using Internet Services to find System Administrator Contact Details
Viewing Active Jobs using the Job Status Menu
Printing the Information Pages from the Machine Status Menu
Folding Documents Printed Using Internet Services
Internet Services uses the embedded web server on the device. This allows you to communicate
with the device over the internet or intranet through your web browser.
Use the Folding options to fold a single sheet of A4 (8.5 x 11”) media in a weight range of 60 to
120 gsm (16 to 32 lb). Pages can be bi-folded (folded into half).
Summary of Contents for WorkCentre
