![background image](http://html.mh-extra.com/html/xerox/workcentre/workcentre_user-manual_884159175.webp)
Fax
WorkCentre
®
XXXX
User Guide
175
10. Select the Resolution option required.
•
Standard (200x100 dpi)
requires the minimum communication time but does not
produce the best image quality for graphics and photos. This is the recommended
resolution for text documents.
•
Fine (200 dpi)
produces average quality text and low quality photos and graphics. This
resolution is recommended for average quality text documents and line art.
11. Press the
Start
button on the control panel to scan the original.
12. Remove the original from the document feeder or document glass when scanning has
completed.
13. Press the
Job Status
button on the device control panel to view the job list and check the status
of the job.
More Information
Using a User ID to Log In at the Device
Explaining the Fax Options
Using Internet Services to find System Administrator Contact Details
System Administrator Guide
www.xerox.com/support
.
Image Quality
Choosing the Image Options for Server Faxes
Server Fax scans your documents and sends them to any type of fax machine that is connected to
a telephone network. Your images are sent from your device to a third party fax server, which relays
them over the telephone network to the fax number of your choice.
Note:
This option must be made available by your System Administrator.
If Authentication or Accounting has been enabled on your device you may have to enter login
details to access the Server Fax features.
Use the Lighten / Darken options to manually adjust the lightness or darkness of the image. Light
originals containing pencil images may produce better output if the darkness is increased. Dark
originals such as halftones or documents with colored backgrounds may need to be lightened.
1. Load your documents face up in the document feeder input tray. Adjust the guide to just touch
the documents.
Or
Lift up the document feeder. Place the document face down onto the document glass and
register it to the arrow at the top left corner. Close the document feeder.
2. Press
the
Clear All
button on the control panel to cancel any previous programming selections.
3. Press
the
Services Home
button.
4. Select
the
Server Fax
button.
5. If required, select the
Server Fax
tab. This is usually the active tab when the Server Fax service
opens.
6. Select
the
Enter Fax Number entry box
and use the numeric keypad, or the touch screen
keypad to enter the recipient’s fax number.
7. Select
the
Add
button.
Summary of Contents for WorkCentre
