![background image](http://html.mh-extra.com/html/xerox/workcentre/workcentre_user-manual_884159149.webp)
Fax
WorkCentre
®
XXXX
User Guide
149
Use the Original Size options to select automatic size detection of the originals, specify the sizes of
mixed size originals, or specify the exact size of an image to be scanned.
1. Load your documents face up in the document feeder input tray. Adjust the guide to just touch
the documents.
Or
Lift up the document feeder. Place the document face down onto the document glass and
register it to the arrow at the top left corner. Close the document feeder.
2. Press
the
Clear All
button on the control panel to cancel any previous programming selections.
3. Press
the
Services Home
button.
4. Select
the
Fax
button on the touch screen.
5. If required, select the
Fax
tab. This is usually the active tab when the Fax service opens.
6. Select
the
Enter Fax Number entry box
and use the numeric keypad, or the touch screen
keypad to enter the recipient’s fax number.
7. Select
the
Add
button.
•
If you want to send the document to more than one recipient enter the additional details,
one recipient at a time, and select the
Add
button again until all the recipients have been
added.
8. Select
the
Close
button to save the information you entered.
9. Select
the
Layout Adjustment
tab.
10. Select the
Original Size
button.
11. Select the Original Size option required.
•
Auto Detect
enables automatic size sensing, this is the default setting. The size detected
is matched to a standard paper size.
•
Preset Scan Area
defines the size of your original from a list of preset, standard original
sizes. You can view the list by using the scroll bar.
•
Custom Scan Area
sets a specific area for scanning and is useful for scanning receipts.
Measure the width (X) and height (Y) of the original to be scanned and enter the X and Y
measurements into the fields provided.
•
Mixed Size Originals
scans documents containing different sized pages. The pages must
be the same width, such as A4 (8.5 x 11”) LEF and A3 (11 x 17”) SEF, other combinations
are shown on the device touchscreen. The device detects the size of the documents and
will produce different output depending on the combinations selected.
12. Select the
OK
button.
13. Press the
Start
button on the control panel to scan the original.
14. Remove the original from the document feeder or document glass when scanning has
completed.
15. Press the
Job Status
button on the device control panel to view the job list and check the status
of the job.
More Information
Faxing Book Pages (Embedded Fax)
Setting a Fax to Reduce Size or Split when Received (Embedded Fax)
Using a User ID to Log In at the Device
Explaining the Fax Options
Using Internet Services to find System Administrator Contact Details
System Administrator Guide
www.xerox.com/support
.
Summary of Contents for WorkCentre
