background image

G&RSLD0)
G&RSLD0)

EN

Rev. 1.0 2006.8

Než za

č

nete p

ř

ístroj používat, prostudujte tento návod k obsluze. Návod uschovejte v blízkosti p

ř

ístroje pro snadné 

vyhledávání informací.

Před použitím tohoto přístroje si laskavě přečtěte tento návod k obsluze. Ponechejte jej u přístroje pro snadné zjištění informací o přístroji.

Læs venligst denne betjeningsvejledning før anvendelse af maskinen. Opbevar den tæt på maskinen, så du har let adgang til referenceoplysningerne.

Version 1.0 2006.8

Læs betjeningsvejledningen, inden du tager maskinen i brug. Opbevar den i nærheden af maskinen, så du hurtigt 
kan slå op i den.

Version 1.0 2006.8

Vor dem Einsatz dieses Geräts das vorliegende Handbuch sorgfältig durchlesen. Das Handbuch beim Gerät
aufbewahren, so dass es immer zur Hand ist.

Vor dem Einsatz dieses Ger ts das vorliegende Handbuch sorgf ltig durchlesen. Das Handbuch bein Ger t aufbe-
wahren, so dass es immer zur Hand ist.

8

8

Lea esta Guía de uso antes de usar la máquina de fax. Guárdela cerca de la máquina de fax para mayor comodidad.

Rev. 1.0 2006.8

Operation 

G

uide

Lea esta guía de uso antes de usar la máquina. Guárdela cerca de la máquina para mayor comodidad.

Summary of Contents for d-Copia 164MF


































































































Reviews: