background image

Lexmark™ C77x
Quick Reference

Loading paper and 
specialty media

Loading 500-sheet trays

1

Remove the tray and place it on a flat, level 
surface.

2

Squeeze the front guide lever and slide the 
guide to the front of the tray.

3

Squeeze the side guide lever and slide the 
guide to the correct position for the size paper 
you are loading. Icons along the back of the tray 
indicate paper sizes.

4

Flex the sheets back and forth to loosen them, 
and then fan them. Do not fold or crease the 
paper. Straighten the edges of the stack on a 
level surface.

5

Place the paper in the tray as shown, print side 
down.Do not load bent or wrinkled paper.

6

Squeeze the front guide lever and slide the 
guide until it firmly touches the stack of paper.

7

Reinstall the tray.

8

Make sure the tray is pushed completely into 
the printer.

Loading the 2000-sheet tray

1

Pull open the tray.

2

Squeeze the side guide lever, lift the guide, and 
place it into the appropriate slot for the size 
paper you are loading.

3

Squeeze the two front guide levers and slide the 
guide to the correct position for the size paper 
you are loading.

4

Slide the bottom support toward the front of the 
tray until it touches the front guide.

5

Flex the sheets back and forth to loosen them, 
and then fan them.

Do not fold or crease the paper. Straighten the 
edges of the stack on a level surface.

6

Place the paper against the back left corner of 
the tray, print side down.

Maximum stack height 
indicator

LT.LG

LT.LG

EX

EX

A4

A4

B5

B5

A5

A5

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for 22L0214 - C 770dtn Color Laser Printer

Page 1: ...he guide until it firmly touches the stack of paper 7 Reinstall the tray 8 Make sure the tray is pushed completely into the printer Loading the 2000 sheet tray 1 Pull open the tray 2 Squeeze the side guide lever lift the guide and place it into the appropriate slot for the size paper you are loading 3 Squeeze the two front guide levers and slide the guide to the correct position for the size paper...

Page 2: ...long the left side of the multipurpose feeder and then push it in as far as it will easily go Do not force the media Note Do not exceed the maximum stack height Overfilling the feeder may cause jams 6 Squeeze the paper guide lever and slide the guide until it lightly touches the side of the stack 7 If you are loading a different type of media than was previously loaded in the tray change the Paper...

Page 3: ...memory device and print PDF documents and supported graphic files Printing a document from a USB flash memory device is similar to printing a held job Note Supported graphic types are gif jpeg jpg bmp png tiff tif pcx and dcx For information regarding tested and approved USB flash memory devices see the Lexmark Web site at www lexmark com 1 Make sure the printer is on and Ready or Busy appears 2 I...

Page 4: ...ams in the rollers under the image transfer unit Area T1 1 Open tray 1 2 Remove any jams 3 Make sure the paper is pushed all the way down into the tray and then close tray 1 Area E 1 Pull the duplex tray E completely out Remove any paper caught in the rollers or inside the printer 2 Reinstall the duplex mechanism in the printer Area T x 1 Carefully open trays 2 through 4 all 500 sheet trays and th...

Reviews: