Siemens 6RA7013-6DV62, Operating Instructions Manual

Page: 471 / 734

05.05 Parameter list
SIEMENS AG 6RX1700-0AD76
11-7
SIMOREG DC Master Operating Instructions
PNU
Description Value range
[Unit]
Steps No. indices
Factory
setting
Type See
Change
(Access /
Status)
o13
Software update in progress
o13.0 Waiting for arrival of start command from HEXLOAD PC routine
(press the DOWN key to abort this status and start a RESET)
o13.1 Deletion of Flash EPROM in progress
xxxxx Display of address currently being programmed
o13.2 The Flash EPROM has been successfully programmed
(a RESET is performed automatically after approx. 1 second)
o13.3 Programming of the Flash EPROM has failed
(press UP key to return to operating state o13.0)
o14 Loading of boot sector in progress
(this operation is performed only in factory)
o15 Electronics not connected to voltage
Dark display: Waiting for voltage at terminals 5U1, 5W1
(electronics supply voltage).
11.2 General visualization parameters
r001
(G113)
Display of terminals 4 and 5 (main setpoint)
-200.0 to 199.99
[%]
0.01% Ind: None
Type: I2 P052 = 3
r002
(G113)
Analog input, terminals 103 and 104 (main actual value)
-200.0 to 199.99
[%]
0.01% Ind: None
Type: I2 P052 = 3
r003
(G113)
Analog input, terminals 6 and 7 (selectable input 1)
-200.0 to 199.99
[%]
0.01% Ind: None
Type: I2 P052 = 3
r004
(G114)
Analog input, terminals 8 and 9 (selectable input 2)
-200.0 to 199.99
[%]
0.01% Ind: None
Type: I2 P052 = 3
r005
(G114)
Analog input, terminals 10 and 11 (selectable input 3)
-200.0 to 199.99
[%]
0.01% Ind: None
Type: I2 P052 = 3
r006
(G115)
Analog output, terminals 14 and 15
Display of output value before normalization and offset
-200.0 to 199.99
[%]
0.01% Ind: None
Type: I2 P052 = 3
r007
(G115)
Analog output, terminals 16 and 17
Display of output value before normalization and offset
-200.0 to 199.99
[%]
0.01% Ind: None
Type: I2 P052 = 3
r008
(G116)
Analog output, terminals 18 and 19
Display of output value before normalization and offset
-200.0 to 199.99
[%]
0.01% Ind: None
Type: I2 P052 = 3
r009
(G116)
Analog output, terminals 20 and 21
Display of output value before normalization and offset
-200.0 to 199.99
[%]
0.01% Ind: None
Type: I2 P052 = 3