Siemens 6RA7013-6DV62, Operating Instructions Manual

Page: 167 / 734

05.05 Start-Up
SIEMENS AG 6RX1700-0AD76
7-9
SIMOREG DC Master Operating Instructions
7.5 Start-up procedure
WARNING
The converter is at a hazardous voltage level even when the line contactor is open. The gating
board (board mounted directly to lower part of housing) has many circuits at hazardous voltage
levels.
Non-observance of the safety instructions given in this manual can result in death, severe
personal injury or substantial property damage.
1
Access authorization
P051 . . . Key parameter
0 Parameter cannot be changed
40 Parameter can be changed
P052 . . . Selection of parameters to be displayed
0 Only parameters that are not set to default are visible
3 All parameters are visible
2
Adjustment of converter rated currents
NOTICE
On North American manufactured Base Drive assemblies (Type 6RA70xx-2xxxx) the US rating
must be set in Parameter P067.
The
rated converter armature DC current
must be adapted by the setting in parameter P076.001
(in %) or parameter P067, if:
0,5
current DC armature Rated
current armature Max.
<
The
rated converter field DC current
must be adjusted by the setting in parameter P076.002 (in %)
if:
0,5
current DC field converter Rated
current field Max.
<
3
Adjustment to actual converter supply voltage
P078.001 . . . Rated input voltage converter armature (in volts)
P078.002 . . . Rated input voltage converter field (in volts)