Siemens 6RA7013-6DV62, Operating Instructions Manual

Page: 23 / 734

05.05 Description
Siemens AG 6RX1700-0AD76
3-1
SIMOREG DC Master Operating Instructions
3 Description
3.1 Applications
Series 6RA70 SIMOREG DC MASTER converters are fully digital, compact units for three-phase
supply which supply the armature and field of variable-speed DC drives with rated armature
currents of between 15A and 3000A. The compact converters can be connected in parallel to
supply currents of up to 12000A. The field circuit can be supplied with currents of up to 85A
(current levels depend on the armature rated current).
3.2 Design
Series 6RA70 SIMOREG DC MASTER converters are characterized by their compact, space-
saving construction. Their compact design makes them particularly easy to service and maintain
since individual components are readily accessible. The electronics box contains the basic
electronic circuitry as well as any supplementary boards.
All SIMOREG DC MASTER units are equipped with a PMU simple operator panel mounted in the
converter door. The panel consists of a five-digit, seven-segment display, three LEDs as status
indicators and three parameterization keys. The PMU also features connector X300 with a USS
interface in accordance with the RS232 or RS485 standard.
The panel provides all the facilities for making adjustments or settings and displaying measured
values required to start up the converter.
The OP1S optional converter operator panel can be mounted either in the converter door or
externally, e.g. in the cubicle door. For this purpose, it can be connected up by means of a 5 m
long cable. Cables of up to 200 m in length can be used if a separate 5 V supply is available. The
OP1S is connected to the SIMOREG via connector X300. The OP1S can be installed as an
economic alternative to control cubicle measuring instruments which display physical measured
quantities.
The OP1S features an LCD with 4 x 16 characters for displaying parameter names in plaintext.
German, English, French, Spanish and Italian can be selected as the display languages.
The OP1S can store parameter sets for easy downloading to other devices.
The converter can also be parameterized on a standard PC with appropriate software connected to
the serial interface on the basic unit. This PC interface is used during start-up, for maintenance
during shutdown and for diagnosis in operation. Furthermore, converter software upgrades can be
loaded via this interface for storage in a Flash memory.
On single-quadrant converters, the armature is supplied via a fully controlled three-phase bridge
B6C and, on four-quadrant devices, via two fully controlled three-phase bridges in circulating-
current-free, inverse-parallel connection (B6)A(B6)C.
The field is supplied via a single-phase, branch-pair half-controlled 2-pulse bridge connection
B2HZ.
The frequencies of the armature and field supply voltages may be different (in a range from 45 to
65 Hz). Operation in the extended frequency range between 23 Hz and 110 Hz is available on
request. The armature circuit supply phase sequence is insignificant.
For converters with 15A to 850A (1200A at 400V supply voltage) rated DC current, the power
section for armature and field is constructed of isolated thyristor modules. The heat sink is thus
electrically isolated. On devices with a higher rated DC current, the power section for the armature
circuit is constructed of disk thyristors and heat sinks (thyristor assemblies) at voltage potential.
The housing and terminal covers on power connections provide protection against accidental
contact for operators working in the vicinity. All connecting terminals are accessible from the front.
The power section cooling system is monitored by means of temperature sensors.