Siemens 6RA7013-6DV62, Operating Instructions Manual

Page: 511 / 734

05.05 Parameter list
SIEMENS AG 6RX1700-0AD76
11-47
SIMOREG DC Master Operating Instructions
PNU
Description Value range
[Unit]
Steps No. indices
Factory
setting
Type See
Change
(Access /
Status)
P395
FDS
(G188)
Hysteresis for If < If min signal
This value is added to the response threshold if If < If min is active.
(see also P394)
0.00 to 100.00
[%]
0.01% of converter
rated field DC
current (r073.i02) Ind: 4
FS=1.00
Type: O2 P052 = 3
P051 = 40
Online
Field current monitoring
Fault message F005 is activated if the actual field current (K0265) is lower than the percentage of the field current setpoint (K0268) set in
P396 for longer than the time set in parameter P397.
Note:
Fault message F005 is only activated, however, if the field current setpoint is > 2% of the converter rated DC current of the field (r073.i02)
ist.
P396
FDS
(G167)
Threshold for field current monitoring
[SW 1.9 and later] 1 to 100
[%]
0.01% of setpoint at
field current con-
troller input (K0268) Ind: 4
FS=50
Type: O2 P052 = 3
P051 = 40
on-line
P397
FDS
(G167)
Field current monitoring time
[SW 1.9 and later] 0.02 to 60.00
[s]
0.01s Ind: 4
FS=0.50
Type: O2 P052 = 3
P051 = 40
on-line
If < If x signal
P398
FDS
(G188)
Field current threshold If x
Setpoint-oriented field current threshold for If < If x limit-value monitor.
Note:
This threshold affects the sequence of control operations for the "Direction
of rotation reversal using field reversal" and "Braking with field reversal"
functions (see Section 9).
The If < If x signal is connected to binector B0216, the actual value at field
current controller input K0265 is applied as If.
B0216 = 0 when K0265 > threshold set in P398
B0216 = 1 when K0265 < threshold set in P398 + hysteresis set in P399
0
→
1 transition takes place when K0265 < P398
1
→
0 transition takes place when K0265 > P398 + P399
0.00 to 199.99
[%]
0.01% of setpoint at
field current
controller input
(K0268) Ind: 4
FS=80.00
Type: O2 P052 = 3
P051 = 40
Online
P399
FDS
(G188)
Hysteresis for If < If x signal
This value is added to the response threshold if If < If x is active.
(see also P398)
0.00 to 100.00
[%]
0.01% of converter
rated field DC
current (r073.i02) Ind: 4
FS=1.00
Type: O2 P052 = 3
P051 = 40
Online
11.20 Settable fixed values
Function: The value set in the parameter is applied to the specified connector
P401
FDS
(G120)
K401 fixed value
is applied to connector K0401
-199.99 to 199.99
[%]
0.01% Ind: 4
FS=0.00
Type: I2 P052 = 3
P051 = 40
Online
P402
FDS
(G120)
K402 fixed value
is applied to connector K0402
-199.99 to 199.99
[%]
0.01% Ind: 4
FS=0.00
Type: I2 P052 = 3
P051 = 40
Online
P403
FDS
(G120)
K403 fixed value
is applied to connector K0403
-199.99 to 199.99
[%]
0.01% Ind: 4
FS=0.00
Type: I2 P052 = 3
P051 = 40
Online
P404
FDS
(G120)
K404 fixed value
is applied to connector K0404
-199.99 to 199.99
[%]
0.01% Ind: 4
FS=0.00
Type: I2 P052 = 3
P051 = 40
Online
P405
FDS
(G120)
K405 fixed value
is applied to connector K0405
-199.99 to 199.99
[%]
0.01% Ind: 4
FS=0.00
Type: I2 P052 = 3
P051 = 40
Online
P406
FDS
(G120)
K406 fixed value
is applied to connector K0406
-199.99 to 199.99
[%]
0.01% Ind: 4
FS=0.00
Type: I2 P052 = 3
P051 = 40
Online
P407
FDS
(G120)
K407 fixed value
is applied to connector K0407
-199.99 to 199.99
[%]
0.01% Ind: 4
FS=0.00
Type: I2 P052 = 3
P051 = 40
Online
P408
FDS
(G120)
K408 fixed value
is applied to connector K0408
-199.99 to 199.99
[%]
0.01% Ind: 4
FS=0.00
Type: I2 P052 = 3
P051 = 40
Online