Ross Synergy 100 MD, Operator'S Manual

Page: 283 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Squeeze & Tease MD Sequences and Wipes • 17–7
Squeeze & Tease – Keyframe 1
3. Press SEL/DVE and Seq to display the Sequence Menu .
4. If the timeline is not already empty, delete the existing workspace by pressing 6. Delete
Workspace .
5. Press 3. Insert Keyframe to insert the first keyframe.
By default, the first Keyframe has a duration of 0 frames. We will now create a slew to
the first Keyframe. This duration will be the time it takes to slew from the initial position
to the first keyframe when running the sequence forwards. It will also serve as the time it
takes to slew from the first keyframe back to the initial position when running the
sequence in reverse.
6. Create a slew to the first Keyframe as follows:
• Press 9. Keyframe Parameters to display the Keyframe Parameters Menu .
• Press 0. Duration to display the Sequence Duration Menu .
Keyframe Parameters — Sequence Duration Menu
• Use the SAT knob to adjust the duration, in frames, to 30 .
• Press BACK to return to the Sequence Menu .
• Press 4. Overwrite Keyframe to save your changes to the duration.
Operating
Tip
You can adjust the Tension , Bias , and Continuity of a spline path
using the procedures in section “ Adjusting Tension, Bias, and
Continuity ” on page 17–12.
Keyframe 1
Use positioner or Hue, Sat, Lum to modify
Keyframe Parameters
0. Duration
1. Hold
On
2. Spline Params
Key 1
Type: Smooth
Frames: 0
Rotate: Normal