Ross Synergy 100 MD, Operator'S Manual

Page: 330 / 402

19–6
•
WARP Effects Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Film Parameters
The Film parameters are accessed by pressing
5. Film
on the Film WARP Menu .
Film WARP Menu — Film Parameters
• Use the
HUE
knob to select the effect from the following list of Film Presets:
• Use the
SAT
knob to adjust the amount of noise added to the effect.
• Use the
LUM
knob to adjust the resolution the effect
.
Defects Parameters
The Defects parameters are accessed by pressing
6. Defects
on the Film WARP Menu .
Film WARP Menu — Defects Parameters
Important The Film WARP will only be visible, and its parameters adjustable,
after selecting a preset with the
Film Presets ( HUE ) knob.
• None • Old Color
• Late 1800’s • Pale Color
• 1900’s • Oversaturated
• 1910’s • Color Fade
• 1920’s • Amateur
• Early Color • VHS
Use positioner or Hue, Sat, Lum to modify
Warp Key 1
0. Category Favorites
1. Warp List
5. Film
6. Defects
7. Light
8. Color
9. Sensitivity
Film
Film:
Film Presets: None
Noise: 0.0%
Resolution: 0.0%
Use positioner or Hue, Sat, Lum to modify
Warp Key 1
0. Category Favorites
1. Warp List
5. Film
6. Defects
7. Light
8. Color
9. Sensitivity
Film
Defects:
Line Scratch: 0.0%
Rand. Scratch: 0.0%
Film Jump: 0.0%