Ross Synergy 100 MD, Operator'S Manual

Page: 275 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Preprocessor Effects • 16–7
Strobe Effect
The Strobe Effect allows you to alternate between freezing and running live video.
Use the following procedure to apply the Strobe Effect :
1. Navigate to the Preprocessor Menu as follows:
• Press FLY KEY in the Effects Keyers Group .
• Press MENU to display the Main Menu .
• Press 8. S&T MD to display the S&T MD Menu .
• Press 3. Preprocessor to display the Preprocessor Menu .
2. Press 4. Strobe to display the Strobe Menu .
Preprocessor — Strobe Menu
3. Use the LUM knob, or twist the Positioner knob clockwise and counter-clockwise , to
select the mode you want the strobe effect to operate in as follows:
•
Frame
— Select this option to have the entire Frame, both Fields for interlaced
video, of the channel image frozen.
• Field — Select this option to have a Field of the channel image frozen.
4. Adjust the duration of the strobe effect as follows:
•
Live Frames (Live Fields)
— Use the
HUE
knob, or move the Positioner left
and right , to adjust the number of live Frames or Fields that will be displayed
between the frozen channel images.
•
Frozen Frames (Frozen Fields)
— Use the
SAT
knob, or move the Positioner
up and down , to adjust the length of time, in Frames or Fields, that the channel
image will be frozen for.
This completes the procedure for applying the Strobe Effect to a channel image.
Operating
Tip
You can use the PREPROC hotkey to display the Preprocessor
Menu directly.
Note If the effect is not On (not yet in use), you must press 4. Strobe again,
to toggle to effect On .
Note You will only be able to select Frame if you are using a Progressive
video format.
Use positioner or Hue, Sat, Lum to modify
Preprocessor 1 2 U O1 O2 Key 1
0. Defocus
1. Mosaic
2. Posterize
3. Colorize
4. Strobe
Strobe Live Frames: 1
Frozen Frames: 0
Mode: Frame
Off
Off
Off
Off
On