Ross Synergy 100 MD, Operator'S Manual

Page: 332 / 402

19–8
•
WARP Effects Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Sensitivity Parameters
The sensitivity parameters are accessed by pressing
9. Sensitivity
on the Film WARP Menu .
Film WARP Menu — Sensitivity Parameters
• Use the
HUE
knob to adjust the amount of red in the effect.
• Use the
SAT
knob to adjust the amount of blue in the effect.
• Use the
LUM
knob to modify the luminance contrast in the effect.
Globe
This WARP has the following parameters that can be adjusted:
• Rotation — This parameter adjusts the rotation of the effect along either the X or
Y-Axis to create the globe effect.
• Position — This parameter adjusts the position of the effect.
• Movement — This parameter adjusts the continuous rotation of the effect.
• Lighting — This parameter adjusts the lighting of the effect.
• Light Pos. — This parameter adjusts the position of the lighting effect.
WARP Menu — Globe
Use positioner or Hue, Sat, Lum to modify
Warp Key 1
0. Category Favorites
1. Warp List
5. Film
6. Defects
7. Light
8. Color
9. Sensitivity
Film
Sensitivity:
Red:
0.000
Blue: 0.000
Luma Contrast: 0.0%
Active Warp: Globe
Warp Key 1
0. Category Favorites
1. Warp List
5. Rotation
6. Position
7. Movement
8. Lighting
9. Light Pos.
Globe