Ross Synergy 100 MD, Operator'S Manual

Page: 227 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Squeeze & Tease MD Basic Operation • 12–17
Using Two Channels in Different Keys
You can manipulate both Squeeze & Tease channels simultaneously even when the channels belong to
different keys.
The channels are selected using the
SEL/DVE
+
C
H
1+2
hotkey (refer to the section “ Using
Hotkeys ” on page 22–3 for more information). The Effects Control display shows “
FLY+
” to
indicate that both Keys are being manipulated (rather than “ FLY1 ” or “ FLY2 ”, as when only a single
key is being controlled).
FLY+ Mode
In
FLY+
mode, you can change the position, rotation, cropping, and aspect of both channels
simultaneously by pressing the
ROTATE
and/or
ASPECT
buttons in the lower Effects Control
Group . The
SOFT
and
BORDER
knobs can also be used to adjust the softness and size of the
borders.
Using the Position/Crop Menu
In the Position / Crop Menu , when you select both keys, the display above the
SEL/DVE
button in
the Mattes Group shows “ 1+2 ” to indicate that both keys are being manipulated.
Mattes Group Label — Two Keys Selected
All items in the Position / Crop Menu can be manipulated except for “ Backside Video ”. This feature
can only be used with one key at a time. The selected key is indicated in the menu display.
All other Position / Crop changes are applied to both keys, however the menu on the Preview monitor
displays information on a
single key only.
Note You cannot adjust border color on two keys at once. If you have
selected two channels in different keys, you must set the border color
for each channel separately.
MENU
EDIT
BACK
SEL
3 4
8 9
M
ATTES
MODE
1+2
DVE