Ross Synergy 100 MD Operator'S Manual Download Page 53

Page: 53 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100)

Using the Menu System • 3–3

5. BACK (100)

Pressing the

BACK (100)

button will return you to the

previous

menu or position in the

menu tree.

(10)

Pressing the

DOWN ARROW (10)

button will scroll

DOWN

to the next item in a

selection list or to the next menu item.

(1)

Pressing the

UP ARROW (1)

button will scroll

to the next item in a selection list or

to the next menu item.

8. Right SEL Button

Pressing the right

SEL

button will

SELECT / ACCEPT

your option, setup, or position

in the menu tree.

9. Display

Once you have entered the menu system,

MENU

appears in the four-character

MODE

displays in the

Effects Control

and

System Control Groups

. This identifies the menu

system as the area of the control panel that has control of the buttons and knobs in the

Effects Control

and

System Control Groups

Menu Information

There are 3 types of menus on the Synergy 100 MD Switcher that allow you to alter settings and
configure inputs and outputs. These types are

Navigation Menus

Option Menus

, and

Split Menus

Navigation Menus

Navigation Menus, such as the

Main Menu

, are used strictly to navigate from menu to menu. They

have no configuration options and will not change as you select different options.

Navigation Menu Example — Main Menu

1) Menu Title
2) Software Version (Main Menu Only)

3) Menu Items (Headings)
4) Navigation Legend

5) Menu Background

MENU
Exit

100
Previous

10
Down

SEL
Accept

1
Up

Main Menu - Synergy 100

vSynergy X MD-S100

0. Effects
1. Inputs
2. Outputs
3. GPIs
4. Communication

5. Disk
6. Personality
7. Options
8. S&T MD
9. Help Menu

Summary of Contents for Synergy 100 MD



















































































































































































































































































































































































































Search results

Summary of Contents for Synergy 100 MD

Reviews:

Related manuals for Synergy 100 MD

Brands by name

Popular brands

Ross Synergy 100 MD, Operator'S Manual

Search results

Summary of Contents for Synergy 100 MD

Reviews:

Related manuals for Synergy 100 MD

Brands by name

Popular brands