Ross Synergy 100 MD, Operator'S Manual

Page: 231 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Squeeze & Tease MD Basic Operation • 12–21
Channel Management
This section outlines how to select channels, change the order of the channel layers, run an Auto Flip
effect, and configure Frontside/Backside effects.
Navigating to the Channel Management Menu
Your Synergy 100 MD switcher allows you to configure the properties of your Squeeze & Tease MD
channels via the
Channel Management Menu .
Use the following procedure to navigate to the Channel Management Menu :
1. Press
MENU
to display the Main Menu .
2. Press
8. S&T MD
to display the S&T MD Menu .
3. Press
3. Channel Mngmnt
to display the Channel Management Menu .
Channel Management Menu
This completes the procedure to navigate to the Channel Management Menu .
Channel Selection
Once you have created a Key Group, you can work with the two video channels simultaneously or
individually.
Selecting a Channel
In the Channel Management Menu , each channel can be toggled on and off within the menu using
1. Channel 1 and 2. Channel 2 . When a Key Group is active, the status is displayed in green on
the Synergy menu system.
Use the following procedure to activate or deactivate a channel in a Key Group:
1. Press MENU to display the Main Menu .
2. Press 8. S&T MD to display the S&T MD Menu .
3. Press 3. Channel Mngmnt to display the Channel Management Menu .
4. Activate or deactivate channels as follows:
• Press 2. Channel 2 to toggle Channel 2 On or Off .
MENU
Exit 100
Previous 10
Down SEL
Accept 1
Up
Channel Management
0. Reserved
1. Channel 1 On
2. Channel 2 Off
3. Layering Auto
4. Backside Video Off
1 Key 1
Current S&T Channel Allocation: 1/4
Trans 0 Key 1:1 Key 2:0