Ross Synergy 100 MD, Operator'S Manual

Page: 291 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Squeeze & Tease MD Sequences and Wipes • 17–15
4. Adjust the channel(s) as required. Refer to the section “ Position/Crop Menu ” on
page 13–2 for details.
5. Navigate to the Modify Keyframes Menu as follows:
• Press
BACK
to display the S&T MD Menu .
• Press
2. Sequence
to display the Sequence Menu .
• Press
8. Modify Keyframes
to display the Modify Keyframes Menu .
Modify Keyframes Menu
6. Select the type of modification as follows:
• Press
0. Modify Type
.
• Use the HUE knob to select a Modify Type. You can select between the following:
~
Relative
— Changes all parameters by the same value, relative to their
original values. For example, changing the location of an image changes the
image in all the selected Keyframes by the same amount, relative to their
starting position.
~
Absolute
— Changes all parameters to the exact same value for all Keyframes
specified. For example, adjusting the location of an image will set that image in
all selected Keyframes to the same location.
7. Set the Keyframe Range you want to apply the changes to as follows:
• Press
1. Modify Range
.
• Use the
HUE
knob to select the first keyframe in the range to be modified. In the
example above, Keyframe 2 is the first to be modified.
• Use the SAT knob to select the last keyframe in the range to be modified. In the
example above, the changes will be applied to Keyframes 2, 3, and 4 inclusive.
8. Press
2. Perform Modify
.
9. Save your sequence as follows:
• Press
SEL/DVE
and
L
OAD
S
EQ
to display the Load/Save Seq. Menu .
2 Modify Keyframes Key 1 1
0. Modify Type: Relative
1. Modify Range
2. Perform Modify
Current Keyframe: 2
Keyframes to be Modified: 2-4
Number of Modified Keyframe Parameters: 3
Sequenc01
Total Keyframes: 4
Use positioner or Hue, Sat, Lum to modify