Ross Synergy 100 MD, Operator'S Manual

Page: 248 / 402

13–10 • Position/Crop Functions Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Crop Vertical
Vertical cropping allows you to adjust the top and bottom edges of the channel image.
Use the following procedure to crop the vertical edges of the channel image:
1. Navigate to the Position/Crop Menu as follows:
• Press
FLY KEY
in the Effects Keyers Group .
• Press
MENU
to display the Main Menu .
• Press
8. S&T MD
to display the S&T MD Menu .
• Press
0. Position/Crop
to display the Position/Crop Menu .
2. Press
6. Crop Vertical
to display the Crop Vertical Menu .
Position/Crop — Crop Vertical Menu
3. Adjust the top and bottom edges of the channel image as follows:
• Top — Use the HUE knob, or move the Positioner left and right , to adjust the
cropping on the top edge of the channel image.
• Bottom — Use the
SAT
knob, or move the Positioner up and down , to adjust the
cropping on the lower edge of the channel image.
This completes the procedure for cropping the vertical edges of the channel image.
Operating
Tip
You can use the
POSN
hotkey to display the Position/Crop Menu
directly.
Use positioner or Hue, Sat, Lum to modify
Position/Crop 1 2 U O1 O2 Key 1
0. Position
1. Rotation
2. Pivot Preset
3. Pivot Position
4. Aspect
Off
5. Crop Horizontal
6. Crop Vertical
7. Transp.
8. Freeze
9. Adv. Positioning
Crop Vertical Top: 0.0%
Bottom: 0.0%
Off
Off