Ross Synergy 100 MD, Operator'S Manual

Page: 253 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Advanced Positioning • 14–3
Spin
The Spin feature allows you to rotate a channel in 3D relative to the fixed reference frame of the
screen (as opposed to a pivot point on the channel itself).
Use the following procedure to spin a channel:
1. Navigate to the Adv. Positioning Menu as follows:
• Press FLY KEY in the Effects Keyers Group .
• Press MENU to display the Main Menu .
• Press 8. S&T MD to display the S&T MD Menu .
• Press 0. Position/Crop to display the Position/Crop Menu .
• Press 9. Advanced Positioning to display the Adv. Positioning Menu .
2. Press 0. Spin to display the Spin Menu .
Adv. Positioning — Spin Menu
3. Rotate the channel as follows:
• X-Spin — Use the HUE knob, or move the Positioner left and right , to spin the
channel around the X-Axis of the screen.
• Y-Spin — Use the SAT knob, or move the Positioner up and down , to spin the
channel around the Y-Axis of the screen.
• Z-Spin — Use the LUM knob, or twist the Positioner knob clockwise and
counter-clockwise , to spin the channel around the Z-Axis of the screen.
This completes the procedure for spinning a channel.
Operating
Tip
You can use the
POSN
hotkey to navigate to the Position/Crop Menu
and then press
9. Adv. Positioning
to display the Adv. Positioning
Menu .
Use positioner or Hue, Sat, Lum to modify
Adv. Positioning 1 2 U O1 O2 Key 1
0. Spin
1. Viewpoint
2. Locate
3. Reserved
4. Reserved
Spin X: 0.000
Y: 0.000
Z: 0.000