Ross Synergy 100 MD, Operator'S Manual

Page: 341 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) WARP Effects
•
19–17
Flare Options Parameters
The Flare Options parameters are accessed by pressing
9. Flare Options
on the Lens Flare WARP
Menu .
Lens Flare WARP Menu — Flare Options Parameters
• Use the
HUE
knob to adjust the aspect ratio of the effect.
• Use the
SAT
knob to select the lighting source type.
• Use the
LUM
knob to adjust the number of lens flares from 0 to 4.
Melt
This WARP has the following parameters that can be adjusted:
• Melt — This parameter adjusts the direction and amplitude of the melt.
• Modulation — This parameter adjusts the size and number of waves in the melt.
• Curve — This parameter adjusts the amount of curve in the melt.
WARP Menu — Melt
Use positioner or Hue, Sat, Lum to modify
Warp Key 1
0. Category Favorites
1. Warp List
5. Position
6. Lighting
7. Placement
8. Color
9. Flare Options
Lens Flare
Flare Options:
Aspect:
52.0%
Flare: Type 1
Flares: 2
Active Warp: Melt
Warp Key 1
0. Category Favorites
1. Warp List
5. Melt
6. Modulation
7. Curve
Melt