Ross Synergy 100 MD, Operator'S Manual

Page: 170 / 402

9–16 • Memory and Disk Functions Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
6. Press
2. Recall
to display the Recall Menu .
Recall Menu
7. Select the category of registers that you want to recall from the storage device. You can
select between the following:
• Press
1. Recall Memories
to recall only Memory Registers .
• Press
2. Recall Personality
to recall only Personality Registers .
• Press
3. Recall Installation
to recall only Installation Registers .
• Press
4. Recall 3D Wipes
to recall only 3D Wipe Registers .
• Press 5. Recall Indiv 3D Wipe to recall a specific 3D Wipe Register .
• Press
6. Recall Bus Map
to recall only the Bus Map . A Bus Map defines the
video source, or internal video signal, that is assigned to each crosspoint button.
8. Confirm the recall of the selected category of registers from a storage device or cancel
the procedure as follows:
• Press
0. Yes
to recall the selected category of registers.
• Press 1. No to exit the menus, without making any changes. The system returns to
the previously stored settings.
This completes the procedure for recalling your setups from a storage device.
Notes on Using a USB Drive
The Synergy 100 USB Port enables you to store and recall complete switcher setups including
memory functions, switcher personalities, installation registers, and more, to a USB Drive.
Consider the following notes when using a USB Drive:
• Write protect should be disabled on any USB Drive.
• All Synergy files must be stored in the Root directory of the USB Drive.
• Only DOS or Windows™ partitions in the USB Drive directory are supported.
• You must wait 5 seconds after inserting the USB Drive into the USB port before you can
save or recall files.
• A delay can be expected when saving files to a USB Drive with more than half of the
available memory allocated.
Important
A decrease in performance will result from storing more than one set
of Synergy files on your USB Drive.
100
Previous 10
Down SEL
Accept 1
Up
Recall
0. Reserved
1. Recall Memories
2. Recall Personality
3. Recall Installation
*4. Recall 3D Wipes 5. Recall Indiv 3D Wipe
6. Recall Bus Map
Hard Drive: SETUP(00)
*indicates the file is present on disk