Ross Synergy 100 MD, Operator'S Manual

Page: 65 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Switcher Basics • 4–3
DSK Drop
The Downstream Keyer Drop (DSK Drop) feature allows you to have the DSK cut off-air whenever a
new source is selected directly on the Program Bus. This means that is the DSK in on-air and you
select any crosspoint on the Program Bus, the DSK will be cut off-air and the new source on the
Program Bus will be cut on-air.
Use the following procedure to enable the DSK drop feature.
1. Navigate to the Personality Menu as follows:
• Press
MENU
to display the Main Menu .
• Press
6. Personality
to display the Personality Menu .
Personality Menu
2. Enable the DSK drop feature as follows:
• Press 1. DSK Drop .
• Press the right SEL button to toggle this feature between Auto or Manual .
~ Auto — Select this option to have the DSK automatically cut off-air when a
new source is selected on the Program Bus.
~ Manual — Select this option to have the DSK take no action when a new
source is selected on the Program Bus.
This completes the procedure for enabling the DSK drop feature.
Sleep Time
The Sleep Time feature allows you to set the amount of time that must pass without the control panel
being used before the control panel goes into Sleep Mode. In sleep mode the buttons and displays on
the control panel will not be lit and
Note The DSK Drop feature will not affect the DSK if a transition is
performed on the Program Bus, or if the same crosspoint button on the
Program Bus is pressed.
Note Having the switcher go into sleep mode, or pressing a button to bring
the switcher out of sleep mode, will not affect the current settings of
the switcher.
MENU
Exit 100
Previous 10
Down SEL
Accept 1
Up
Personality - Synergy 100
0. Trans PV
1. DSK Drop
2. Sleep Time
3. Menu Bttn
4. AutoRcall 5. GstoreMem On
6. Isolate DSK Off On
Manual
10 min
Menu Only
On