Ross Synergy 100 MD, Operator'S Manual

Page: 351 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) WARP Effects
•
19–27
Lighting Parameters
The Lighting parameters are accessed by pressing
7. Lighting
on the Ripple WARP Menu .
Ripple WARP Menu — Lighting Parameter
• Use the
HUE
knob to adjust the intensity of light on the wave of the ripple.
Movement Parameters
The Movement parameters are accessed by pressing
8. Movement
on the Ripple WARP Menu .
Ripple WARP Menu — Movement Parameters
• Use the HUE knob to create continuous wave motion.
• Use the SAT knob to create a water drop effect
Sand
This WARP has the following parameters that can be adjusted:
• Sand —This parameter adjusts the amount and direction of the sand effect.
• Wind — This parameter adjusts the amount and direction of the wind.
• Edge Peaks — This parameter adjusts the edge peaks of the effect.
• Edge Curve — This parameter adjusts the edge curve of the effect.
Use positioner or Hue, Sat, Lum to modify
Warp Key 1
0. Category Favorites
1. Warp List
5. Wave
6. Position
7. Lighting
8. Movement
Ripple
Lighting:
Intensity:
0.0%
Use positioner or Hue, Sat, Lum to modify
Warp Key 1
0. Category Favorites
1. Warp List
5. Wave
6. Position
7. Lighting
8. Movement
Ripple
Movement:
Continuous:
0.0%
Water Drop: 0.0%