Ross Synergy 100 MD, Operator'S Manual

Page: 281 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Squeeze & Tease MD Sequences and Wipes • 17–5
its duration. This is the default sequence rate. If you want the sequence to run at a
different rate, you can set a new rate manually. Refer to the section “
Running a
Sequence ” on page 17–23 for detailed instructions.
• Sequence Name — This field indicates the sequence name. When creating a new
sequence, “New Sequence” is set as a default title. Once a sequence has been saved, any
changes to the sequence will be indicated by the word “Modified” appearing next to the
sequence name. It disappears the next time you save the sequence.
• Number of Keyframes — This field indicates the number of Keyframes in the
sequence.
• Duration — This field (shown in minutes, seconds, and frames), indicates the
programmed duration of the sequence for the selected Key. The Duration only applies to
the sequence.