Ross Synergy 100 MD, Operator'S Manual

Page: 60 / 402

3–10 • Using the Menu System Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
• Press the right
SEL
button to accept the new settings.
BNC C10 — Inputs Menu 2
• You have now set
BNC C10
up as an
Alpha
. Other configuration changes are
made to this, and other menu items in the same manner as you have just performed.
Now that you have finished configuring the BNC, you will want to exit the menu
system.
6. Press
MENU
to display the Installation Change Screen . Whenever you change any of
the switcher settings, you will be asked to confirm these changes when you exit the
menu system. In this case, since we changed
BNC C10
to an
Alpha
, the switcher
requires us to confirm this change.
Installation Change Screen
7. Accept or cancel these changes as follows:
• Press
0. Confirm
to accept the changes.
• Press
1. Cancel
to exit the menus safely, without making any changes. The system
returns to the previously stored settings.
This completes the example procedure for navigating to the Inputs Menu and setting up a particular
BNC.
Important As this has been an example, you should press 1. Cancel so as not to
change the setting of your Synergy 100 MD switcher.
MENU
Exit 100
Previous 10
Down SEL
Accept 1
Up
Inputs
0. Input
1. Type
2. AutoKey
3. Shaped
4. Aud Chan1 BNC C10
Video
Black
No
None
None
5. Aud Chan2
720p 59.94 6. Vid Format
10
Down SEL
Accept 1
Up
0. Confirm 1. Cancel
You are about to change the switcher's
installation settings.
WARNING!