Ross Synergy 100 MD, Operator'S Manual

Page: 300 / 402

17–24 • Squeeze & Tease MD Sequences and Wipes Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
3. Run the sequence using the fader or buttons in the Transition Control Group as
follows
• Use the
AUTO TRANS
button to run the sequence automatically.
• Use the
Fader
to run the sequence manually. The fader movement controls the rate
that the sequence is run in.
• Use the
CUT
button to cut a Key on or off.
This completes the procedure to run a sequence.
Running a Sequence at a Specific Rate
The System Control Group shows the time in the numeric display and AUT1 and/or AUT2 as the
text flag.
When a sequence is actually in progress in Auto Trans mode, the MODE display shows AUTS and
the numeric display shows the duration of the sequence. If both keys are transitioning, the numeric
display shows the longer of the two durations.
Use the following procedure to select a specific rate:
1. Ensure the sequence is loaded. Refer to the section “ Loading a Sequence ” on
page 17–20 for instructions.
2. Note the current transition rate in the display of the System Control Group . If the rate
is not showing, press the MENU/EDIT button to turn the menu off and display the
transition rate.
System Control Group — Current Transition Rate
3. Press the
SEL
button in the System Control Group .
4. Use the
ª
and
©
buttons to scroll to the desired rate in frames — from 1 to 999 . The
new rate is updated automatically in the display.
System Control Group — New Rate Display
This completes the procedure to run the sequence at a specific rate. When both keys are selected for
sequence transition, the panel displays both sequence durations, alternating; when only one key is
selected, its duration is shown.
Important If a Hold is inserted in the sequence it will only be implemented when
running a sequence using Auto Trans. Refer to the section “
Adding a
Hold to a Sequence ” on page 17–18 for more information.
E F F E C T S C O N T R O L M A T T E S S Y S T E M C O N T R O L
EDIT
SEL BACK MENU SEL CNTR
DVE
SEL
REV
5
0
6
1
7
2
8
3
9
100 10 1 4
AUT1
5 1 0
Mode
SEL Button
E F F E C T S C O N T R O L M A T T E S S Y S T E M C O N T R O L
EDIT
SEL BACK MENU SEL CNTR
DVE
SEL
REV
5
0
6
1
7
2
8
3
9
100 10 1 4
AUTS
0 2 1
Mode
SEL Button