Ross Synergy 100 MD, Operator'S Manual

Page: 165 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Memory and Disk Functions • 9–11
The source effect has two channels, and
the destination effect has only one
channel.
The channel that is not contained in the
destination effect will be cut off air at the
start of the transition and the other channel
will interpolate.
The source effect has one channel and the
destination effect has two channels.
The channel that is not contained in the
source effect will cut on (to its final state)
at the start of the transition and the other
channel will interpolate.
The source effect has only one channel in
use, and the destination effect has a
different channel in use.
The source channel will interpolate to the
destination effect of the second channel
(remember that both must be in the same
Keyer).
The source effect has one channel, and you
are recalling a destination effect with a
two-channel object.
The second channel of the object will cut
on (to its final state) at the start of the
transition and the first channel will
interpolate.
The source effect has two channels and
you are recalling a destination effect with
a
two-channel object.
Both channels will transition to the
destination effect and be made part of an
object.
Effects Dissolve Behavior Table
Scenario Result