Ross Synergy 100 MD, Operator'S Manual

Page: 326 / 402

19–2
•
WARP Effects Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Selecting and Working with WARP Effects
The following sections describe each type of WARP and provide specific instructions for adjusting the
WARP parameters. The instructions in this chapter use the hotkey method to access the main
functions of
Squeeze & Tease MD . You may also use the menu system to access these functions.
Use the following procedure to access the WARP Menus :
1. Press FLY KEY in the Effects Keyers group.
2. Press SEL/DVE + WARP to display the S&T MD WARP Menu .
S&T MD — Default WARP Menu
3. Press
0. Category
.
4. Use the
©
and
ª
buttons to select the desired WARP effect.
5. Press the right SEL button to display that WARP effects menu.
This completes the procedure for access the WARP Menus .
Operating
Tip
When using a WARP effect as a wipe, you can apply it to a background
or a key. You can use a WARP effect in a sequence and have the
values interpolate between keyframes.
Important
When the
FLY KEY
is not enabled, an error message displays. You
must first enable the
FLY KEY
before attempting to continue.
Operating
Tip
If desired, you can use the Positioner to make general adjustments to a
particular parameter, then use the Matte Color knobs for fine-tuning.
When working with an image, each time you select a new type of
WARP, the parameters return to their default values.
Warp Key 1
0. Category WARP Off
1. Warp List WARP Off
Active Warp: WARP Off