Ross Synergy 100 MD, Operator'S Manual

Page: 246 / 402

13–8 • Position/Crop Functions Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Channel Aspect Ratio
The Aspect feature enables you to squeeze or stretch a channel image horizontally and/or vertically.
Use the following procedure to adjust the aspect values of a channel image:
1. Navigate to the Position/Crop Menu as follows:
• Press FLY KEY in the Effects Keyers Group .
• Press MENU to display the Main Menu .
• Press 8. S&T MD to display the S&T MD Menu .
• Press 0. Position/Crop to display the Position/Crop Menu .
2. Press 4. Aspect to display the Aspect Menu .
Position/Crop — Aspect Menu
3. Adjust the size of the channel image as follows:
• X-Aspect — Use the HUE knob, or move the Positioner left and right , to squeeze
or stretch the channel image horizontally.
• Y-Aspect — Use the SAT knob, or move the Positioner up and down , to squeeze or
stretch the channel image vertically.
• Size — Use the LUM knob, or twist the Positioner knob clockwise and
counter-clockwise , to squeeze or stretch the channel image in both directions at the
same time.
This completes the procedure for adjusting the aspect values of an channel image.
Note
This feature can be used on channels only, if you are working with an
object, the
Aspect
option will be unavailable.
Operating
Tip
You can use the POSN hotkey to display the Position/Crop Menu
directly.
Note
If the effect is not On (not yet in use), you must press 4. Aspect
again, to toggle to effect On .
Operating
Tip
The Size function is independent of the X-Aspect and Y-Aspect. For
example, if you set the X-Aspect to 2.000, the Y-Aspect to 1.000 and
the Size to 2.000, the width of the channel image (X-Aspect) will be
quadrupled and the height (Y-Aspect) will be doubled.
Use positioner or Hue, Sat, Lum to modify
Position/Crop 1 2 U O1 O2 Key 1
0. Position
1. Rotation
2. Pivot Preset
3. Pivot Position
4. Aspect
On
5. Crop Horizontal
6. Crop Vertical
7. Transp.
8. Freeze
9. Adv. Positioning
Aspect X: 100%
Y: 100%
Size: 100%
Off
Off