Ross Synergy 100 MD, Operator'S Manual

Page: 266 / 402

15–10 • Borders Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Border Color
The Color feature allows you to change the colors used in the border. This feature can be applied to
either the active border or all the borders, depending on whether the Auto Defaults has been set to On
or Off .
Adjusting the Border Color
Use the following procedure to adjust the border colors:
1. Navigate to the Border Menu as follows:
• Press
FLY KEY
in the Effects Keyers Group .
• Press
MENU
to display the Main Menu .
• Press
8. S&T MD
to display the S&T MD Menu .
• Press
1. Border
to display the Border Menu .
2. Press
3. Color
to display the Edit Color Menu .
Border — Edit Color Menu
3. Press
Edit Color1
,
Edit Color2
, or
Edit Color3
to display the color information for
that color.
4. Adjust the selected color as follows:
•
Hue
— Use the
HUE
knob, or move the Positioner left and right , to adjust the
color of the border. A full 360 degrees of hue adjustment is provided.
Note
When you save a switcher setting, the
Auto Default
setting you have
chosen for borders will not be saved as part of that setting.
Note If you want to preserve your color changes, you will have set Auto
Defaults to Off before you change the colors. If you do not, the colors
will switch back to the default values if you change the Border
Texture .
Operating
Tip
You can use the
BORDER
hotkey to display the Border Menu
directly.
Use positioner or Hue, Sat, Lum to modify
Edit Color 1 2 Key 1
0. Edit Color1
1. Edit Color2
2. Edit Color3
3. Default Colors
Edit Color1 Hue: 0.0%
Saturation:
0.0%
Luminance: 100.0%