Ross Synergy 100 MD, Operator'S Manual

Page: 247 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Position/Crop Functions • 13–9
Cropping
Cropping a channel image allows you bring the sides of a channel image in, reducing the viewable
area, but not changing the size of the channel image.
Crop Horizontal
Horizontal cropping allows you to adjust the left and right sides of the channel image.
Use the following procedure to crop the horizontal edges of the channel image:
1. Navigate to the Position/Crop Menu as follows:
• Press
FLY KEY
in the Effects Keyers Group .
• Press
MENU
to display the Main Menu .
• Press
8. S&T MD
to display the S&T MD Menu .
• Press
0. Position/Crop
to display the Position/Crop Menu .
2. Press
5. Crop Horizontal
to display the Crop Horizontal Menu .
Position/Crop — Crop Horizontal Menu
3. Adjust the left and right edges of the channel image as follows:
• Left — Use the HUE knob, or move the Positioner left and right , to adjust the
cropping on the left edge of the channel image. As the knob is turned, the left edge
moves toward the right and crops the left edge of the channel image.
• Right — Use the
SAT
knob, or move the Positioner up and down , to adjust the
cropping on the right edge of the channel image. As the middle knob is turned, the
right edge moves left and crops the right side of the channel image.
This completes the procedure for cropping the horizontal sides of the channel image.
Operating
Tip
You can use the
POSN
hotkey to display the Position/Crop Menu
directly.
Use positioner or Hue, Sat, Lum to modify
Position/Crop 1 2 U O1 O2 Key 1
0. Position
1. Rotation
2. Pivot Preset
3. Pivot Position
4. Aspect
Off
5. Crop Horizontal
6. Crop Vertical
7. Transp.
8. Freeze
9. Adv. Positioning
Crop Horizontal Left: 0.0%
Right: 0.0%
Off
Off