Ross Synergy 100 MD, Operator'S Manual

Page: 260 / 402

15–4 • Borders Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Border Appearance
The overall appearance of the border can be adjusted to give different effects. You can adjust the
following properties of the channel border.
• Border Softness
• Border Symmetry
• Border Transparency
Border Softness
Border softness values are used to create a soft-edge effect on the inside of the border.
Use the following procedure to adjust the softness of the border:
1. Navigate to the Border Menu as follows:
• Press FLY KEY in the Effects Keyers Group .
• Press MENU to display the Main Menu .
• Press 8. S&T MD to display the S&T MD Menu .
• Press 1. Border to display the Border Menu .
2. Press 0. Size to display the Size Menu .
Border — Size Menu
Operating
Tip
It is best to set the border size first, then adjust the softness. If the
amount of softness exceeds the border size, the system increases the
apparent size of the border.
To create the widest possible border, adjust
Size
to the maximum
setting and adjust
Softness
to the minimum setting.
Operating
Tip
You can use the BORDER hotkey to display the Border Menu
directly.
Use positioner or Hue, Sat, Lum to modify
Border 1 2 Key 1
Size Size: 0.0%
Softness: 15.0%
Symmetry: 50.0%
0. Size
1. Style
2. Corners
3. Color
4. Advanced Off 5. Auto Default