Ross Synergy 100 MD, Operator'S Manual

Page: 334 / 402

19–10
•
WARP Effects Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Movement Parameters
The Movement parameters are accessed by pressing
7. Movement
on the Globe WARP Menu .
Globe WARP Menu — Movement Parameters
• Use the
HUE
knob to set the rate of continuous rotation around the Y-Axis (horizontal
rotation).
• Use the SAT knob to set the rate of continuous rotation around the X-Axis (vertical
rotation).
Lighting Parameters
The Lighting parameters are accessed by pressing 8. Lighting on the Globe WARP Menu .
Globe WARP Menu — Lighting Parameters
• Use the HUE knob to adjust the brightness and visibility of the lighting highlight.
Increasing values produces a brighter highlight.
• Use the
SAT
knob to adjust the shadow effect on the globe. Increasing values cause the
areas of the globe not lit by the light source to appear darker.
• Use the LUM knob to select the type of light source:
~ None – Use this option to disable the light source. Flat lighting is used.
~ Natural – Use this option to apply a soft, natural-looking light source.
~ White – Use this option to apply a harsh, white light source.
Note
Values of 0.000 mean no continuous rotation is applied.
Use positioner or Hue, Sat, Lum to modify
Warp Key 1
0. Category Favorites
1. Warp List
5. Rotation
6. Position
7. Movement
8. Lighting
9. Light Pos.
Globe
Movement:
X-Rate:
0.000
Y-Rate: 0.000
Use positioner or Hue, Sat, Lum to modify
Warp Key 1
0. Category Favorites
1. Warp List
5. Rotation
6. Position
7. Movement
8. Lighting
9. Light Pos.
Globe
Lighting:
Highlight:
25.0%
Shadow: 100.0%
Type: None