Ross Synergy 100 MD, Operator'S Manual

Page: 154 / 402

8–6 • Key Modifiers Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Positioner
The Positioner is an assignable module that allows you to manipulate the size and position of wipe
patterns, Flying Keys, masks, crop edges, and adjust PST PATT keys, and adjust Squeeze & Tease
Keys, depending upon the selected mode.
The control of the 3-axis Positioner (also known as a joystick ) is illustrated below:
Positioner (Joystick)
• Moving the Positioner left or right controls the horizontal position of the key or mask. It
also controls the left and right edges of the Flying Key in cropping mode and the
horizontal rotation of a flown key when the
Squeeze & Tease MD option is installed.
• Moving the Positioner up or dow n controls the vertical position of the key or mask. It
also controls the upper and lower edges of the Flying Key in cropping mode and the
vertical rotation of a flown key when the
Squeeze & Tease MD option is installed.
• Twisting the Positioner clockwise or counter-clockwise controls the size of the key or
mask. It also provides a means of rotating the vertical and horizontal wipes when the
ROTATE button is active and the planar (or Z-axis) rotation of a flown key when the
Squeeze & Tease MD option is installed.
Left / Right
(X-Axis) Movement:
Horizontal Position Control
Up / Down
(Y-Axis) Movement:
Vertical Position Control
Clockwise /
Counter-clockwise
(Z-Axis) Movement:
Size Control