Ross Synergy 100 MD, Operator'S Manual

Page: 343 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) WARP Effects
•
19–19
Curve Parameters
The Curve parameters are accessed by pressing
7. Curve
on the Melt WARP Menu .
Melt WARP Menu — Curve Parameters
• Use the
HUE
knob to adjust the angle of the curve.
• Use the
SAT
knob to move the wave across the image.
Obscure
This WARP allows you to obscure a section of video using a mosaic pattern. The following
parameters can be adjusted:
• Pixelation — This parameter adjusts the size of the mosaic tiles.
• Position — This parameter adjusts the position of the obscured video.
• Shape — This parameter adjusts the shape of the mosaic tile.
• Effects — This parameter adjusts the lighting effects.
WARP Menu — Obscure
Operating
Tip
You can use this parameter to apply a tilt effect.
Use positioner or Hue, Sat, Lum to modify
Warp Key 1
0. Category Favorites
1. Warp List
5. Melt
6. Modulation
7. Curve
Melt
Curve:
Slope:
0
Phase: 0
Active Warp: Obscure
Warp Key 1
0. Category Favorites
1. Warp List
5. Pixelation
6. Position
7. Shape
8. Effects
Obscure