Ross Synergy 100 MD, Operator'S Manual

Page: 242 / 402

13–4 • Position/Crop Functions Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
• Z-Axis — Twist the Positioner knob clockwise and counter-clockwise to change the
distance of the channel from the zero point (for example, move it closer or further away
from you).
This completes the procedure for adjusting the position of the key on the screen. Refer to the section
“
Using the Positioner ” on page 12–10 for more information on the 3-axis positioner.
Operating
Tip
You can not change the size of the channel. You can only change the
distance of the channel from the zero point.