Ross Synergy 100 MD, Operator'S Manual

Page: 179 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Peripheral Control and More • 10–9
Editor Interface
The Editor option allows the Synergy 100 MD switcher to be controlled by an editing system using
the GVG 100, GVG 200, or GVG 4000 protocol. The Editor software option must be enabled.
Use the following procedure to turn the Editor feature on or off:
1. Navigate to the Effects Menu as follows:
• Press MENU to display the Main Menu .
• Press 0. Effects to display the Effects Menu .
Effects Menu
2. Press 0. Editor to toggle the Editor function On or Off .
This completes the procedure for toggling the Editor on or off.
Refer to Chapter 9, “ Communication Setup ” of the Synergy 100 MD Engineering Manual for more
information on setting up an editor with your Synergy 100 MD switcher.
Note
The Editor Option must be installed in order to be able to interface
with an editing system. Refer to Chapter 6 “
Software Upgrades and
Options ” in the Synergy 100 MD Engineering Manual to ensure that
the Editor option is installed. If not, please contact Ross Video
Technical Support for details.
Note
The Editor can also be enabled by pressing (or double-pressing) the
MENU
button in the System Control Group . Refer to Chapter 10
“ Completing Setup ” in the Synergy 100 MD Engineering Manual
for more information.
MENU
Exit 100
Previous 10
Down SEL
Accept 1
Up
Effects
0. Editor
1. GPIs
2. Center
3. Safe Title
4. Reserved On
Off
Off
Off 5. UltraChrome Parameters
6. Global-Store
7. MultiDSK