Ross Synergy 100 MD, Operator'S Manual

Page: 342 / 402

19–18
•
WARP Effects Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Melt Parameters
The Melt parameters are accessed by pressing
5. Melt
on the Melt WARP Menu .
Melt WARP Menu — Melt Parameters
• Use the
HUE
knob to select the type of melt: Block Expands, Block Shrinks, Hole
Expands, or Hole Shrinks.
• Use the
SAT
knob to indicate the direction of the melt: Up, Down, Right, or Left.
• Use the
LUM
knob to adjust the height of the individual waves in the melt effect.
Modulation Parameters
The Modulation parameters are accessed by pressing
6. Modulation
on the Melt WARP Menu .
Melt WARP Menu — Modulation Parameters
• Use the HUE knob to adjust the number of melting waves in the effect.
• Use the SAT knob to adjust the size of the melting waves.
• Use the LUM knob to shrink or expand the video, based on the type of melt you have
selected.
Use positioner or Hue, Sat, Lum to modify
Warp Key 1
0. Category Favorites
1. Warp List
5. Melt
6. Modulation
7. Curve
Melt
Melt:
Type:
Block-Expands
Direction: Down
Amplitude: 0
Use positioner or Hue, Sat, Lum to modify
Warp Key 1
0. Category Favorites
1. Warp List
5. Melt
6. Modulation
7. Curve
Melt
Modulation:
Frequency:
25
Peak: 25
Lateral Dist.: 200