Ross Synergy 100 MD, Operator'S Manual

Page: 120 / 402

7–14 • Keying Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Performing an UltraChrome Chroma Key in Basic Mode
The following topics are discussed in this section:
• Creating an UltraChrome Chroma Key in Basic Mode
• Using the Color Map Preview in Basic Mode
• Adjusting an UltraChrome Chroma Key in Basic Mode
Creating an UltraChrome Chroma Key in Basic Mode
Use the following procedure to create an UltraChrome Chroma Key in Basic Mode:
1. Select a background source on the PGM bus. This provides the background over which
the Key will appear.
2. Press
KEY1
in the Transition Control Group to preview the Key. This step will also
serve to assign the Key bus and Effects Keyers Group to Key 1 .
3. Select a Key source on the Key 1 bus.
4. Press
CHROMA KEY
in the Effects Keyers Group to display the UltraChrome
Parameters Menu on the preview overlay.
5. Select Basic Mode as follows:
• Press
0. Color Pick
.
•
Key Mode
— Use the
Hue
knob to select
Basic
.
6. Select a color to key out, or remove, as follows:
• Press
0. Color Pick
.
UltraChrome Parameters — Color Pick Menu
•
Color
— Use the
SAT
knob to select the color to be removed as follows:
~
Blue
— Select this option to have blue removed from the video signal.
~
Cyan
— Select this option to have cyan removed from the video signal.
~
Green
— Select this option to have green removed from the video signal.
~
Yellow
— Select this option to have yellow removed from the video signal.
~
Red
— Select this option to have red removed from the video signal.
~
Magenta
— Select this option to have magenta removed from the video
signal.
Use positioner or Hue, Sat, Lum to modify
UltraChrome Parameters
0. Color Pick
1. Initialize Key
2. Background
3. Foreground Range
4. Spill Suppress 5. Softness
6. Color Map Off
Color Pick Key Mode: Basic
Color: Blue