Ross Synergy 100 MD, Operator'S Manual

Page: 5 / 402

27) Use only power cords specified for this product and certified for the country of use. Refer to the
Product Power Cord Requirement section that follows.
28) The safe operation of this equipment requires that the user heed and adhere to all installation and
servicing instruction contained within the equipment’s Engineering Manuals.
Product Power Cord Requirements
This product is supplied with certified 10A/125V SVT type supply cords. Conductors are color coded
white (neutral), black (line), and green or green/yellow (ground).
Operation of this equipment at line voltages exceeding 130V requires that alternative supply cords
with appropriate voltage and current ratings be used.
International Line Voltages 200 - 240 Volts
This product has been designed for use with certified IEC 320- C13 10A/250V - H03 VV-F3G
1.00mm
2
type line cord.
International product orders are supplied with a certified 10A/250V line cords, utilizing a molded
3-pin IEC 320-C13 type connector at one end and stripped conductors on the other. One line cord is
provided. Conductors are CEE color coded; blue (neutral), brown (line), and green/yellow (ground).
Installation by a qualified electrician, of an appropriately approved A/C wall plug certified for the
country of use, is required.
Alternatively, other IEC 320 C-13 type power cords may be used, provided that they meet the
necessary safety certification requirements for the country in which they are to be used. Refer to the
correctly specified line cord above.
EMC
Notices
United States of America
FCC Part 15
This equipment has been tested and found to comply with the limits for a class A Digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
CANADA
This Class “A” digital apparatus complies with Canadian ICES-003.
Cet appariel numerique de la classe “A” est conforme a la norme NMB-003 du Canada.
Caution
North American Line Voltages 100 - 120 Volt
Notice
Changes or modifications to this equipment not expressly approved by
Ross Video Limited could void the user’s authority to operate this
equipment.