Ross Synergy 100 MD, Operator'S Manual

Page: 221 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Squeeze & Tease MD Basic Operation • 12–11
Using the Mattes Color Knobs
The Mattes Color knobs are used to select and fine tune menu parameters.
Mattes Color Knobs
Throughout the rest of this guide, the Mattes Color knobs are referred to as follows:
• The HUE knob
• The SAT knob
• The LUM knob
Note
Mattes Color knobs are “end-stop” knobs and as such, the electrical
position of the knob may not match the current physical position of the
knob. When this happens a full range of adjustment may be
unavailable. Therefore, you must re-synchronize each knob
before
adjusting a parameter.
Re-synchronize a knob by turning it fully clockwise, then fully
counter-clockwise a few times. Full-range adjustments can now be
made.
M
ATTES
HUE
SAT
LUM