Ross Synergy 100 MD, Operator'S Manual

Page: 78 / 402

4–16 • Switcher Basics Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Full Restart
This function performs both a hardware and a software reset simultaneously. Switcher memory
registers, personality registers, installation registers, and custom control registers are not affected by
the reset, but all other switcher parameters (for example, the current state of the panel) are reset.
BLACK
will be selected on all buses.
Use the following procedure to perform a full restart of the switcher:
1. Navigate to the System Resets Menu as follows:
• Press
MENU
to display the Main Menu .
• Press
7. Options
to display the Options Menu .
• Press
5. System Resets
to display the System Resets Menu .
System Resets Menu
2. Press
2. System Restart
to display the System Restart Confirmation Screen .
System Restart Confirmation Screen
3. Press
0. Confirm
to restart the switcher.
This completes the procedure for restarting the switcher.
Important It is not recommended to reset the frame by turning the power off and
then on again as this may damage the hard disk.
Operating
Tip
Press 1. Cancel to not restart the switcher and return to the Default
Menu .
MENU
Exit 100
Previous 10
Down SEL
Accept 1
Up
System Resets
0. All
1. System Shutdown
2. System Restart
3. Inputs/Outputs
4. Restart Global-Store
10
Down SEL
Accept 1
Up
0. Confirm 1. Cancel
Are you sure you want to RESTART the system?