Ross Synergy 100 MD, Operator'S Manual

Page: 331 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) WARP Effects
•
19–7
• Use the
HUE
knob to modify the number of scratch lines in the effect.
• Use the
SAT
knob to modify the number of random scratches in the effect.
• Use the
LUM
knob to modify the number of times the film will jump in the effect.
Light Parameters
The Light parameters are accessed by pressing
7. Light
on the Film WARP Menu .
Film WARP Menu — Light Parameters
• Use the HUE knob to modify the number of times the effect flashes.
• Use the SAT knob to modify the intensity of light on the effect.
• Use the LUM knob to modify the radius of the effect.
Color Parameters
The Color parameters are accessed by pressing
8. Color
on the Film WARP Menu .
Film WARP Menu — Color Parameters
• Use the
HUE
knob to modify the hue of the effect.
• Use the
SAT
knob to modify the saturation of color on the effect.
• Use the
LUM
knob to modify the luminance of the effect.
Use positioner or Hue, Sat, Lum to modify
Warp Key 1
0. Category Favorites
1. Warp List
5. Film
6. Defects
7. Light
8. Color
9. Sensitivity
Film
Light:
Flash:
0.0%
Intensity: 0.0%
Radius: 0.0%
Use positioner or Hue, Sat, Lum to modify
Warp Key 1
0. Category Favorites
1. Warp List
5. Film
6. Defects
7. Light
8. Color
9. Sensitivity
Film
Color:
Hue:
0.0%
Saturation: 0.0%
Luminance: 0.0%