Ross Synergy 100 MD, Operator'S Manual

Page: 320 / 402

18–4
•
Lighting Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Position
You can position the light anywhere in 3D space, including locations in front of or behind the image.
The values for each parameter are displayed in the lower half of the menu.
Use the following procedure to adjust the position of the directional light:
1. Navigate to the Lighting Menu as follows:
• Press
FLY KEY
in the Effects Keyers Group .
• Press
SEL/DVE
+
Light
to display the Lighting Menu .
2. Press
1. Position
to display the Position of Directional Light Menu .
Position — Lighting Menu
3. Adjust the lights X, Y, and Z co-ordinates as follows:
• Use the
HUE
knob, or move the Positioner left and right , to control the horizontal
position of the light on screen.
• Use the SAT knob, or move the Positioner up and down , to control the vertical
position of the light on screen.
• Use the
LUM
knob, or move the Positioner clockwise and counter-clockwise , to
change the position of the light on the Z-Axis.
This completes the procedure to adjust the position of the directional light.
Presets
Create a directional light by selecting one of the preset directional lights. Presets include predefined
directional light positions, and Intensity and Ambient-level presets, such as Dim or Ambient Only.
Use the following procedure to use one of the lighting presets:
1. Navigate to the Lighting Menu as follows:
• Press FLY KEY in the Effects Keyers Group .
• Press SEL/DVE + Light to display the Lighting Menu .
2. Press 2. Presets to display the Presets Menu .
Use positioner or Hue, Sat, Lum to modify
Lighting Key 1
Natural
On
Position
X: 0.000
Y: 0.000
Z: 1.000
12
0. Lighting Setup
1. Position
2. Presets
3. Auto Follow
4. Luminance Clipping