Ross Synergy 100 MD, Operator'S Manual

Page: 268 / 402

15–12 • Borders Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Working with Multiple Channels
The following table shows how the Border effects behave when working with both channels selected.
Operating
Tip
When working with objects, the border must be applied to each
channel separately.
When working with two channels, a quick way to give any border
parameter equal values is to adjust the value to 100.0% with both
channels selected. Then you can adjust the parameter to the desired
value for both channels.
Multiple Channel Border Effects
Border Parameter Scenario Result
Size and Softness
All border values are the same for
both channels. The values are displayed. The joystick or knobs can
be used to create the same sized border with the same
softness values for both channels.
Channel 1 and Channel 2 border
values are different.
A message is displayed to indicate the values are
different. The values for Channel 1 are displayed.
The joystick or knobs can be used to increase or
decrease the border size or softness by an equal
percentage.
Softness
All border values are the same for
both channels. The knob values are displayed. The knobs can be
used to adjust the border softness for both channels.
Channel 1 and Channel 2 border
values are different.
A message is displayed to indicate the values are
different. The values for Channel 1 are displayed.
The knobs can be used to increase or decrease the
border softness by an equal percentage.
Color
All border values are the same for
both channels The knob values are displayed. The knobs can be
used to adjust the border color for both channels.
Channel 1 and Channel 2 border
values are different.
A message is displayed to indicate the values are
different. The values for Channel 1 are displayed.
The knobs can be used to increase or decrease border
color values by an equal percentage.