Ross Synergy 100 MD, Operator'S Manual

Page: 245 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Position/Crop Functions • 13–7
Channel Rotation
Once the Pivot Point has been selected, you can adjust the rotation of the channel.
Use the following procedure to adjust the rotation of the channel around the Pivot Point :
1. Navigate to the Position/Crop Menu as follows:
• Press FLY KEY in the Effects Keyers Group .
• Press MENU to display the Main Menu .
• Press 8. S&T MD to display the S&T MD Menu .
• Press 0. Position/Crop to display the Position/Crop Menu .
2. Press 1. Rotation to display the Rotation Menu .
Position/Crop — Rotation Menu
3. Adjust the rotation of the channel as follows:
• X-Axis — Use the HUE knob, or move the Positioner left and right , to rotate the
channel horizontally around the X-Axis .
• Y-Axis — Use the SAT knob, or move the Positioner up and down , to rotate the
channel vertically around the Y-Axis .
• Z-Axis — Use the LUM knob, or twist the Positioner knob clockwise and
counter-clockwise , to rotate the channel around the Z-Axis .
This completes the procedure for adjusting the rotation of the channel around the Pivot Point .
Operating
Tip
You can use the POSN hotkey to display the Position/Crop Menu
directly.
Use positioner or Hue, Sat, Lum to modify
Position/Crop 1 2 U O1 O2 Key 1
0. Position
1. Rotation
2. Pivot Preset
3. Pivot Position
4. Aspect
Off
5. Crop Horizontal
6. Crop Vertical
7. Transp.
8. Freeze
9. Adv. Positioning
Rotation X: 0.0
Y: 0.0
Z: 0.0
Off
Off